Processing

Locations

200 Sheldon Drive
Cambridge, Ontario,
N1R 7K1
Tel 905-570-5780
Fax 905-696-8696
2345 Stanfield Road, Suite 203
Mississauga, Ontario,
L4Y 3Y3
Phone 905-696-6960
Fax 905-696-8696
35165 Beattie Drive
Sterling Heights, Michigan
48312
Phone 586-274-9550
Fax 586-274-9554

SLITTER

PARAMETERS

Equipment ID 48" STAMCO MULTI HEAD 21" BARCO TEMPER MILL
Gauge Minimum 0.010" 0.010" 0.012"
Gauge Maximum 0.125" 0.120" 0.105"
Entry Width Minimum 5" 1.5"  
Entry Width Maximum 49.5" 20" 10"
Entry I.D. Minimum 20" 20" Used for gauge
corrections and / or
tempering to full hard
Entry I.D. Maximum 24" 24"  
Entry O.D. Maximum 60" 60"  
Entry Coil Wgt. Maximum 20,000# 8,000#  
Exit I.D. Minimum 20" 20"  
Exit I.D. Maximum 20" 20"  
Exit O.D. Maximum 60" 60"  
Exit Width Minimum 0.500" 0.500"  
Exit Width Maximum 48" 20"  
Exit Coil Wgt. Maximum 20,000# 8,000#  
Side Trim Minimum 0.250" 0.250"  
Side Trim Maximum 2" 2"  
Maximum Tensile 50 ksi @ 0.125"
Above 50 ksi Inquire
50 ksi @ 0.120"
Above 50 ksi Inquire